Day Tripping
Fanshawe Conservation Area
The dam.
Shoreline.
Lots of shells.
How many rings? How old?
January 05, 2017
January 02, 2017
Tutorial: 18 inch Doll Booties
Tutorial
18 inch Doll Booties
The lady has some GREAT ideas for boots and booties!
Faux fur and everything!
She's got some great YouTube videos, too, to show the details.
But I couldn't find the basic instructions to make the booties.
So I made this tutorial.
NOTE: I used fleece for my booties. If you are not using fleece, this tutorial may not work for you.
NOTE: I did not add a velcro closure to the back of the booties.
Step 1. Print Diane's pattern (link above) and cut out your pieces.
I used fleece for the top and toe pieces.
I used cardboard for the inner sole and vinyl for the outer sole.
Fold down the top edge about 1/4 inch or so, and sew with zig zag stitch (this works best with fleece).
The toe piece has a dotted line to show the stitch line.
I matched the centre of the toe piece to the centre of the cutout on the top piece.
Pin in place.
You'll need to stretch the top piece to fit.
You may also need to snip the centre where shown on the pattern.
Another view of how the toe piece is pinned to the top piece.
Another view of how the toe piece is pinned to the top piece.
Sewing the toe piece to the top piece with about a 1/4 inch seam.
Another view of sewing the toe piece to the top piece.
There. All sewed.
At this point, you should top stitch the seam on the outside.
I forgot to do it.
:(
In Diane's videos, she adds velcro to the back of the boot.
I decided to try the fleece bootie with the back seam sewn closed.
So I put the cardboard inner sole into place and measured where the back seam would be.
I pinned it.
Then I sewed the seam.
Then turn the booties right side out.
Time to glue in the cardboard inner sole.
I snipped around the outer edge a bit.
Here you see one bootie snipped, and one bootie not snipped.
BE SURE YOU HAVE A RIGHT SOLE AND LEFT SOLE IN PLACE!
That's important.
You don't want 2 left feet.
I used a glue gun and glued the snipped edges down to the cardboard inner sole.
Both booties glued.
Now time to add the outer sole.
If you view Diane's videos, you'll see she has some excellent suggestions for materials to use for the outer sole.
She also talks to making sure the outer sole is supported properly.
I decided to use vinyl and was not too concerned about support.
Gluing the vinyl to the bottom.
All glued.
Finished!
I wish I'd remembered to top stitch that seam though.
They don't look too bad.
December 31, 2016
November 20, 2016
November 16, 2016
November 13, 2016
Sunday Solitude
Sunday Solitude
Remember the milkweed pods from last week?
Just look at them now!
This will be so good for the monarch butterflies if more of these milkweeds grow.
November 09, 2016
November 07, 2016
Topsy Turvy Dolls!
Topsy Turvy Dolls!
Now available in my ennadoolf shop on Etsy!
Such empathy from a doll!
She can be sad when you are sad, happy when you are happy.
Each one is OOAK (one of a kind).
Each one has her own personality.
A possible future heirloom.
When my second granddaughter received her topsy turvy doll for her 4th birthday, she immediately figured out how to use it! as she was leaving to go home, she tipped it to its sad face and said softly "birthday over". :)
Kinda tugs your heart a bit eh!
But the doll was feeling her. :)
Shop now for best selection at ennadoolf on Etsy.
November 06, 2016
November 03, 2016
Shop Update: ennadoolf
Shop Update
ennadoolf
Sewing friend?
This little Pokémon was just a small distraction while sewing a new topsy Turvy doll for my shop.
November 02, 2016
October 30, 2016
October 26, 2016
Subscribe to:
Posts (Atom)